Stationary grandstands
Stationary grandstands Fixed in place, or flush in the floor until you need them
BÜTEC builds permanently installed grandstands from the same platform elements as mobile ones. That is why they fit your floor plan, heights and interior exactly. With Servo Stage platforms, the flat hall floor becomes a grandstand with four levels whenever you need one.
- Buildmodular platform elements
- Servo variantpit only 20 cm
- Levels4 in 20 cm steps
- Finishdecks and cladding to suit the room
Benefits
Built in from platform elements to fit your floor plan, columns and floor finish
Measured on site
The modular build from platform elements fits the grandstand exactly to the shape of the room, its columns and its heights.
Part of the architecture
Matching decks, special floor finishes such as parquet, and claddings make the grandstand part of the interior.
The flat floor becomes a grandstand
With Servo Stage platforms, the hall stays flat as long as you need the floor – and becomes a stepped grandstand in a short time.
No storage, no transport
A stationary grandstand stays where it is needed. No platforms in the basement, no trips through the building.
How it works
Servo Stage in the floor Four grandstand levels from a 20 cm floor pit
Elements that are raised from above save the most space. Retracted, they lie flush with the surrounding floor. When a grandstand is needed, your staff raise the elements level by level.
Floor pit only 20 cm
Measured from the structural floor to the top of the surrounding finished floor. This can be planned in during a renovation, too.
Four levels, 20 cm each
The flat floor turns into four levels in 20 cm steps within a very short time.
Adjusted from above, no power
The Servo Stage is unlocked from above with a key and raised; gas springs take part of the weight.

Where it is used
Where a fixed grandstand makes the difference
Municipal multi-purpose halls
A flat floor for celebrations and meetings, stepped rows for theatre and concerts.
Village and community halls
One room for every club – without anyone carrying platforms up from the basement.
Foyers of public buildings and banks
Seating steps that become part of the architecture and disappear again when not needed.
Multi-purpose event spaces
Built in for theatre and sports halls, matched to the floor finish and the interior.
Technical data
Stationary grandstand Key data for your planning
- Construction
- modular, from BÜTEC platform elements, permanently installed
- Surfaces
- decks and special floor finishes, e.g. parquet; claddings to suit the room
- Servo Stage version: pit depth
- 20 cm (structural floor to top of finished floor)
- Servo Stage version: levels
- 4 levels in 20 cm steps
- Servo Stage version: adjustment
- from above, with a key and gas springs
- Planning
- design, production and assembly by BÜTEC
We define the distributed load, heights and seating layout for your project. Need more height? The Servo Stage 1500 reaches 150 cm.
Project
Verti Music Hall, Berlin Tiers extended, existing seats reused
In front of the fixed tiers of the concert hall, BÜTEC built a grandstand extension from platforms as a special build. Adapter plates in the support panels take the existing grandstand seats – they simply hook in. The railings were made to the client's design, with oak handrails.
- Verti Music HallBerlinGrandstand extension in front of the tiers, plus a rollable stage of 18 × 12 m
Accessories
Matching accessories Railings, stairs, floor finishes, claddings
Downloads Documents for Stationary grandstands
For planners
Questions
Planning, pit, seats, mobile or fixed Questions about stationary grandstands
When should we involve BÜTEC in the planning?
Ideally during the planning phase of a new building or renovation. Then floor pits for Servo or motor platforms, recesses and connections can be planned in from the start.
How deep must the floor pit be for the Servo Stage version?
20 cm, measured from the structural floor to the top of the surrounding finished floor. This gives you four levels in 20 cm steps.
Can we reuse our existing seats?
Often, yes. In the Verti Music Hall in Berlin, adapter plates take the existing grandstand seats; they simply hook in. We check this for your seating.
Stationary or mobile – which suits us?
If the grandstand is always needed in the same place, or should disappear into the floor: stationary. If it should move through the hall or clear the room completely: a mobile grandstand or the Push'n Pull.
New building or renovation? Plan the grandstand in from the start
Send us the floor plan, the number of seats you need and the floor build-up. We propose the type, the levels and the floor finish and prepare a quote.
































