Contact

Got questions?

BÜTECGesellschaft für bühnentechnische Einrichtungen mbHIndustriestrasse 41D-40822 Mettmann
Go to contact form
BÜTEC Push'n Pull telescopic grandstand pulled out and set with chairs in a sports hall

Grandstands

Sport in the morning Seating in the afternoon – one person, 5 minutes per block

With the Push'n Pull telescopic grandstand, one person pulls out a block with 10 rows in five minutes – without power, without clamps, without loose platforms. For outdoor events, the Applause grandstand trailer opens 124 covered seats at the push of a button.

  • Push'n Pull: 1 person, 5 minutes per block, no power
  • Applause: 124 covered seats in 10 minutes
  • Platform systems up to 750 kg/m², TÜV GS-tested
  • Design, structural calculations, production and assembly from one manufacturer

Your hall today

Two uses in one day turn the grandstand set-up into an extra shift

  1. Only a few hours between sport and doors open

    School sport runs until midday, the audience arrives in the afternoon. In between, the grandstand must be ready – and in the evening it must be gone again.

  2. Every row needs hands

    Place single platforms, lock the plug-in legs, clamp everything together: with a grandstand built from loose parts, the crew grows with every row.

  3. The equipment room is already full

    After the event the hall needs its floor back. The grandstand has to disappear into the smallest possible space.

BÜTEC grandstands put the work into the mechanism, not onto your team: telescopic pull-out, push button, Quick-Lock.

Product finder

Not sure which grandstand fits? Tell us what you plan – the finder narrows it down

Choose what your event needs. For a grandstand, the product finder asks only what matters: what it is for, how it is used, how many people set it up and how much storage you have. Then it shows the matching systems with key figures.

How it works

Mechanics instead of muscle Four ways to a grandstand a small team can set up

All BÜTEC grandstands stand on the same tested platform systems as our stages. What makes them different is how they get into position.

  • Push'n Pull: pull out, don't build

    Lift the lowest platform with the pull-out bar and pull it forward – all other rows follow and lock into place. Blocks side by side are locked from above with Quick-Lock, without any connecting clamps.

  • Applause: seating at the push of a button

    The grandstand trailer travels to the venue on its own axles. An electro-hydraulic system opens the covered grandstand, and one person positions and secures it.

  • Mobile grandstand from platforms

    Standing or seated grandstand in any shape, built from BÜTEC Standard or Compact platforms. Seats, benches and railings are fixed to the compact corner with standard screws – no drilling.

  • Stationary: the flat floor becomes a grandstand

    Permanently installed Servo Stage platforms are adjusted from above. A 20 cm floor pit is enough for four levels in 20 cm steps.

Push'n Pull telescopic grandstand pulled out in four steps: from the closed block to the open grandstand

Which grandstand?

Which grandstand fits your venue? Six types by set-up, seats and location

GrandstandSize / seatsSet-upPowerTypical use
Push'n Pull telescopic grandstandBlock 2 m wide, up to 10 rows and 2 m high; 40 seats with 10 rows pulled out1 person, 5 minutes per blocknot neededsports and multi-purpose halls, presentation halls, theatres
Applause grandstand trailer124 seats (114 with 2 stairways), covered1 person, 10 minutes, push buttonelectro-hydraulicsports events, rallies, parades, carnival
Mobile grandstandplanned to your space, standing or seatedassembled from platforms, legs and clampsnot neededsports halls, sports grounds, studios, trade fairs, outdoor events
Stationary grandstandplanned to your space; with Servo Stage 4 levels of 20 cmpermanently installed; Servo version adjusted from abovenot neededmulti-purpose halls, community centres, foyers
Custom grandstandmade to measure; built up to almost 8 m, on two levelsdesign, structural calculations and assembly by BÜTECnot neededlisted buildings, rooms with columns or curves, concert halls
Choir and orchestra riserstandard sets for approx. 50 or approx. 100 singersfrom single platforms, castors clip in underneathnot neededchurches, monasteries, concert halls, conservatories

Values from BÜTEC brochures and data sheets. Crew and time for mobile and stationary platform grandstands depend on size and shape – we plan them for your room.

Not sure what fits? Compare every model with filters in the catalogue – or let the product finder suggest a suitable system.

Proof

5 minutes, 124 seats, 8 metres What our grandstands have shown they can do

for one person to pull out a Push'n Pull block with 10 rows
5 min
covered seats that the Applause grandstand trailer opens in 10 minutes
124
distributed load of the Standard and Compact platform systems, tested with a 1.7 safety factor
750 kg/m²
total height of a two-level grandstand in a listed building, with no anchoring
≈ 8 m
  • Verti Music HallBerlinMobile grandstand extension in front of the tiers; the existing grandstand seats hook in via adapter plates.
  • Historic gasworksListed round buildingTwo-level grandstand up to almost 8 m high, with no intervention in the building, produced in just under 10 weeks.

Questions

Crew, power, inspection, storage What venue managers ask before they decide

How many people do we need to set up the grandstand?

With the Push'n Pull, one person pulls a block out in five minutes and pushes it back in. The Applause grandstand trailer is also opened by one person, in ten minutes. For mobile grandstands built from single platforms, the effort depends on size and shape – we plan the grandstand with you.

Do the grandstands need a power supply?

No. The Push'n Pull is pulled out by hand, so it needs no power and has no energy costs. Mobile, stationary and choir grandstands also work without power. Only the grandstand trailer uses an electro-hydraulic system.

Are the grandstands tested?

The Standard and Compact platform systems carry 750 kg/m² and are TÜV GS-tested with a 1.7 safety factor. The Push'n Pull comes with structural calculations to Eurocode 9 and DIN. For complete installations there are TÜV inspection books for grandstands indoors and outdoors. Which documents your authority requires depends on your local building and venue regulations – we agree the documents with you.

Where do we store the grandstand?

A retracted Push'n Pull block stands on 1.25 × 2 m – that is 40 seats with 10 rows. BÜTEC platforms for mobile grandstands stack at approx. 95 mm per platform. Stationary Servo Stage grandstands need no storage at all: they lie flush in the floor.

Our room has columns, curves or is a listed building.

Then a custom grandstand is the right choice. In a listed gasworks we built a two-level grandstand with no anchoring and no intervention in the building – free-standing on steel columns and trusses.

Which seats are possible?

Seat shells, stacking chairs, benches or theatre chairs – or no seats at all, and the grandstand becomes a standing terrace. See the overview of seating options.

Can we extend the grandstand later?

Yes. You can add Push'n Pull blocks one by one, and mobile grandstands built from platforms can take more elements at any time.

How many seats do you need? We plan the grandstand for your hall

Send us a sketch or drawing with dimensions, the number of seats and how you use the room. You receive a proposal for the right type of grandstand and a quote.