Downloads
Truss load tables The permitted load per span, before you hang anything
For each truss and each span, the table gives the permitted distributed load, the maximum point load at mid-span and the third-point load, each with the corresponding deflection. The values are in German and English in one document.
2-point trusses
2-point trusses F22, F32 and F42
3-point trusses
3-point trusses F23, F33 and F43, also as HD
Load tables
4-point trusses
4-point trusses F24, F34 and F44, also as HD
Load tables
Questions about reading the tables
Which load cases do the tables show?
Three: the uniformly distributed load (in total and per metre), a single point load at mid-span and the third-point load. Each value comes with the deflection in millimetres.
To which standard are the values calculated?
Most tables state explicitly that the calculation takes DIN EN 13814 for temporary structures into account. The exact reference is on each data sheet.
My set-up does not fit any table. What now?
Structures that go beyond the tables need structural calculations. Describe the set-up to us and we will advise you.
Know your span and load? We tell you which truss carries it
Tell us the span, the loads and the set-up. We recommend the series and accessories.