Connectors F22/23/24
For: F22, F23, F24
Trusses · 2-point
Truss F22 The light 2-point truss for short spans
Truss F22
in various Lengths
Extensive
Range of Accessories
Opt. Powder Coating
in RAL colours
The F22 is the smallest BÜTEC 2-point truss: 220 mm profile, 35 mm chord tubes, light and with a small transport volume. It spans shorter distances and carries frames for screens, banners and decoration – with its own load table for 2 to 13 m.
- Profile2-point · 220 mm
- Chord tube35 × 2 mm
- Segments0.25–4 m
- Load table2–13 m span
- TestingEurocode 9 tested
Benefits
Light to carry, clearly documented
Capacity on paper
Its own load table for spans of 2 to 13 m, prepared taking DIN EN 13814 (temporary structures) into account. Structural calculations available, tested to Eurocode 9.
Joined by cone
Conical connectors, truss pins and spring cotters for the F2x size class; according to the catalogue, the conical euro connection is compatible with various systems from other manufacturers.
Light to transport
According to the manufacturer, the F22 stands out for its low weight and small transport volume.
Special lengths and RAL
Special lengths and shapes from our own welding shop; powder coating in RAL colours possible.
Technical data
Technical data Truss F22 at a glance
Profile and material
- Profile
- 2-point (two chord tubes, flat)
- Outer size
- 220 mm (centre-to-centre 185 mm)
- Chord tube
- 35 × 2 mm
- Bracing (diagonal)
- 10 × 2 mm
- Alloy
- EN AW 6060 T66
- Testing
- Eurocode 9 tested, structural calculations available
System
- Segment lengths
- 0.25 to 4 m (straights 25 to 400 cm), special lengths possible
- Connection
- Conical connection; conical connectors, truss pins and spring cotters for F2x
- System parts
- Corners 45°, 60°, 90°, 120° and 135° (horizontal and vertical), 3-way corners and T-pieces, 4-way cross and T-piece, radius, base plate
- Finish
- Powder coating in RAL colours possible
Loads and use
- Load table
- Spans of 2 to 13 m: uniformly distributed load, centre point load, third-point load, each with deflection
- Basis
- prepared taking DIN EN 13814 (temporary structures) into account
- Use
- Shorter spans and small decoration jobs: frames for banners and screens, additions to exhibition stands
Permitted loads: see load table and data sheet. Outer sizes as stated in the data sheet.
Load table
Load table F22 Permitted loads for spans of 2 to 13 m
Values from the F22 data sheet: permitted uniformly distributed load, centre point load and third-point load per span, each with deflection. The current data sheet is binding. For your specific construction we prepare structural calculations on request.
Tap to enlarge · swipe sideways
Choosing a size
Other 2-point sizes F22, F32 or F42?
| Type | Outer size | Chord tube | Segment lengths | Table for | Typical use |
|---|---|---|---|---|---|
| F22 | 220 mm | 35 × 2 mm | 0.25–4 m | 2–13 m | shorter spans, decoration |
| F32 | 287 mm | 50 × 2 mm | 0.25–5 m | 2–13 m | trade fair stands, event technology |
| F42 | 398 mm | 50 × 2 mm | 0.25–5 m | 3–14 m | medium spans |
“Table for” = span range covered by the load table; “circles” = 2 to 12 m.
Accessories
Matching accessories Clamps, connectors and more for the F22
Connectors and spacers match the F2x size class; clamps and couplers are TÜV-tested.
Connectors2
Spacers F22/23/24
For: F22, F23, F24
Lighting & mounting2
Half clamps (half couplers)
Load capacity: 10 to 750 kg
Clamps (multiclamps)
Load capacity: 15 to 250 kg
Downloads Data sheet and parts list for the F22
For planners
Tender text / CADOn request – we send you tender texts and CAD data for your project.Request
Questions about truss F22
How much does the F22 carry at my span?
That is in the load table above and in the data sheet: for spans of 2 to 13 m, the permitted uniformly distributed load, the centre point load and the third-point load, each with deflection. For your specific construction with load points, suspension or towers, we prepare structural calculations on request.
Does the F22 fit trusses from other makers?
The F22 is joined with a conical euro connection. According to the BÜTEC catalogue, this connection is compatible with various systems from other manufacturers; bolted connections are also possible. Tell us the maker and type of your stock and we will check the fit.
Is the F22 available in special lengths or in colour?
Yes. Our own certified aluminium welding department makes special lengths and shapes; powder coating is available in RAL colours.
Know your span? We put the F22 together for your job
Tell us spans, loads and layout. We put together lengths, corners and accessories for the F22 and prepare a quote – with structural calculations if you need them.
Truss F22
2-point · 220 mm2-point · 220 mm · 35 × 2 mm