Connectors F32/33/34
For: F32, F33, F34
Trusses · 2-point
Truss F32 2-point truss in 290 mm, power track on request
Truss F32
in various Lengths
Extensive
Range of Accessories
Opt. Powder Coating
in RAL colours
The F32 combines the 290 mm profile with two 50 mm chord tubes – for moderate spans at trade fairs and in event technology. On request, BÜTEC makes it with a profile that takes a power track, for lighting design in stand building and shop fitting.
- Profile2-point · 287 mm
- Chord tube50 × 2 mm
- Segments0.25–5 m
- Load table2–13 m span
- TestingEurocode 9 tested
Benefits
One profile for trade fair, event and lighting
Capacity on paper
Its own load table for spans of 2 to 13 m, prepared taking DIN EN 13814 (temporary structures) into account. Structural calculations available, tested to Eurocode 9.
Joined by cone
Conical connectors, truss pins and spring cotters for the F3x size class; according to the catalogue, the conical euro connection is compatible with various systems from other manufacturers.
Power track built in
On request, BÜTEC makes the F32 with a profile that takes a power track – for lighting design in stand building and shop fitting.
Light to transport
According to the manufacturer, the F32 stands out for its low weight and small transport volume.
Technical data
Technical data Truss F32 at a glance
Profile and material
- Profile
- 2-point (two chord tubes, flat)
- Outer size
- 287 mm (centre-to-centre 237 mm)
- Chord tube
- 50 × 2 mm
- Bracing (diagonal)
- 20 × 2 mm
- Alloy
- EN AW 6082 T6
- Testing
- Eurocode 9 tested, structural calculations available
System
- Segment lengths
- 0.25 to 5 m (straights 25 to 500 cm), special lengths possible
- Connection
- Conical connection; conical connectors, truss pins and spring cotters for F3x
- System parts
- Corners 45°, 60°, 90°, 120° and 135° (horizontal and vertical), 3-way corners and T-pieces, 4-way cross and T-piece, radius, base plate
- Finish
- Powder coating in RAL colours possible
- Option
- Profile that takes a power track
Loads and use
- Load table
- Spans of 2 to 13 m: uniformly distributed load, centre point load, third-point load, each with deflection
- Basis
- prepared taking DIN EN 13814 (temporary structures) into account
- Use
- Moderate spans, trade fair stands and event technology; frames for banners and screens
Permitted loads: see load table and data sheet. Outer sizes as stated in the data sheet.
Load table
Load table F32 Permitted loads for spans of 2 to 13 m
Values from the F32 data sheet: permitted uniformly distributed load, centre point load and third-point load per span, each with deflection. The current data sheet is binding. For your specific construction we prepare structural calculations on request.
Tap to enlarge · swipe sideways
Choosing a size
Other 2-point sizes F22, F32 or F42?
| Type | Outer size | Chord tube | Segment lengths | Table for | Typical use |
|---|---|---|---|---|---|
| F22 | 220 mm | 35 × 2 mm | 0.25–4 m | 2–13 m | shorter spans, decoration |
| F32 | 287 mm | 50 × 2 mm | 0.25–5 m | 2–13 m | trade fair stands, event technology |
| F42 | 398 mm | 50 × 2 mm | 0.25–5 m | 3–14 m | medium spans |
“Table for” = span range covered by the load table; “circles” = 2 to 12 m.
Accessories
Matching accessories Clamps, connectors and more for the F32
Connectors and spacers match the F3x size class; clamps and couplers are TÜV-tested.
Connectors4
Spacers F32/33/34
For: F32, F33, F34
Wall bracket F32/33/34
For: F32, F33, F34
Wall bracket Eco F3x/F4x
For: F32, F33, F34, F42, F43, F44
Lighting & mounting2
Half clamps (half couplers)
Load capacity: 10 to 750 kg
Clamps (multiclamps)
Load capacity: 15 to 250 kg
Downloads Data sheet and parts list for the F32
For planners
Tender text / CADOn request – we send you tender texts and CAD data for your project.Request
Questions about truss F32
How much does the F32 carry at my span?
That is in the load table above and in the data sheet: for spans of 2 to 13 m, the permitted uniformly distributed load, the centre point load and the third-point load, each with deflection. For your specific construction with load points, suspension or towers, we prepare structural calculations on request.
Does the F32 fit trusses from other makers?
The F32 is joined with a conical euro connection. According to the BÜTEC catalogue, this connection is compatible with various systems from other manufacturers; bolted connections are also possible. Tell us the maker and type of your stock and we will check the fit.
Can the F32 take a power track?
Yes. On request, BÜTEC makes the F32 with a profile that takes a power track – for lighting design in stand building and shop fitting. Tell us in your enquiry which track system you want to use.
Know your span? We put the F32 together for your job
Tell us spans, loads and layout. We put together lengths, corners and accessories for the F32 and prepare a quote – with structural calculations if you need them.
Truss F32
2-point · 287 mm2-point · 287 mm · 50 × 2 mm